30-Foot Round Laa Above Ground Swimming Pool Liner - 52-Inch Wall Height - 20 Gauge

Unibead liners can be used on either overlap or beaded swimming pools. For use on an overlap style pool, simply open up the j-hook portion and slip this over the pool wall.

For beaded style pools, use the standard bead after removing the j-hook portion along the score or groove mark. This will leave only the standard bead which clips into the opening on the bead receiver.

Liner Features:

• Size: 30'
• Wall Height: 52"
• Shape: Round
• Connection: Unibead
• Gauge: 20
• Material: 100% Virgin Vinyl

About Our Liners:

• 100% virgin vinyl construction
• Our liners have been vulcanized, high pressure heat bonded and vacuum sealed
• Material has been RF vinyl welded with lap welded seams
• Durable liners free of impurities

Liner has a 20-year limited warranty against manufacturer material defects

• PRETTY PLEASING PATTERN - Navy diamond tiles are encased around a field of pale blue and tan tiles over a pebbled field with the Laa pattern. The North American cut material is hand-folded to prevent permanent creasing and excess wrinkling. Before installing, lay the liner out in the sun for a minimum of one hour to warm up the vinyl ensuring it is able to stretch when adding water. The best temperatures to install would be between 70-80 degrees.
• MEASURE TWICE, BUY ONCE Whether installing for the first time, or replacing an existing liner, the Laa pattern offers durability while not breaking the bank. Be sure to check the measurements of your swimming pool to assure the correct size is purchased. Pool height is determined by measuring the outside wall from the ground to underneath the top rail. Oval pool size is determined by measuring from the center point across the longest and widest ends.

• STAY COOL IN THE POOL Enjoy the warm weather while spending quality time with family and friends. Your backyard pool will surely become the place to be during those hot summer days. Stay cool in more ways than one with the Laa liner.